Home > Product > Machinery Spare parts > Shaft

Mill Parts Feeding End Casting Hollow Shaft

Yogie mainly produce Large size non-standard mining and cement equipments spare parts,such as mill liner plate,hammer,gear ring,bearing, bearing pedestal, vibration exciter,vibrator housing,hollow shaft,eccentric shaft,support roller etc.
Product Details:

  

Product name

Mill Parts Feeding End Casting Hollow Shaft

Material

Chome steel,Alloy steel

Heat treatment

Normalizing,annealing,quenching&tempering,surface quenching,case hardening

Machining

CNC lathing,CNC Milling,CNC Boring,CNC Grinding,CNC Drilling

Main Equipments

1.6m,5m CNC Vertical Lathe,5m,8m,12m Horizontal lathe,2.2m,3m,4m,6m CNC Gantry boring and milling machine, 2sets CNC Machinging center VMC 850L, 6m CNC Boring machine, 2sets 2M CNC Grinding machine,50mm,80mm drilling machine, hobbing and shaping gear machine, automatic feeding machine,bending machine,plate shearing machine,press machine,etc.

Diameter of sprocket

Max. 5000mm

Diameter of gear

Max.2200mm

Inspection:

Chemical composition test,Ultrasonic test,Magnetic test,Tensile strength test,Impact Test,Hardness Test,Dimension test

Weigth

Max.10Tons 

  

Product name

Mill Parts Feeding End Casting Hollow Shaft

Material

ZG270-500

Brand

YOGIE

Structure

Casting

Process

Lathing, milling,grinding,drilling

Heat treatment

Quenching should be taken to eliminate inner power before processing,but the mechanical properties of the material should not be reduced.

Diameter of Hollow Shaft

2000mm

Weight

3820kg

Standard

ISO

Model Number

According to drawing

Packaging Details

Package adapting to ocean transport

Delivery Time

30 - 90 days

Certificate

ISO9001-2008

The hollow shaft has a wide range of application, and is usually used in mill. this hollow shaft used in mill parts feeding end for feeding, the material of Mill Parts Feeding End Casting Hollow Shaft is ZG270-500, and ZG270-500 is the old standard ZG35. Components of zg270-500 (ZG35)is showed as follows : c-0.4;  Si - 0.5; Mn - 0.9; S- less than 0.04; P- less than 0.04. Residual - less than 1%. the mill parts feeding end casting hollow shaft with high wear resistance,because of its high proportion of manganese’s components for hollow shaft.


Technical datas of Mill Parts Feeding End Casting Hollow Shaft:

1. Chemical composition and mechanical properties of castings conform to the provisions on GB979-67 when the Mill Parts Feeding End Casting Hollow Shaft is processed .

2. Quenching should be taken in Mill Parts Feeding End Casting Hollow Shaft to eliminate inner power before processing, but the mechanical properties of the material should not be reduced.

3. After machining of Mill Parts Feeding End Casting Hollow Shaft, there should not be any impact on the defects of strength and surface roughness.

4. Mill Parts Feeding End Casting Hollow Shaft shall be ultrasonic flaw detection, its quality should be meet theⅠGB7233 level requirements; Surface of mill parts feeding end Casting Hollow Shaft must be approved by magnetic powder flaw detection, the quality of mill parts Casting Hollow Shaft should be not less than the ZBJ04006 level 2 requirements.


Related Products
Feedback: