Crusher wear is divided into what aspects. The wear of machinery and equipment during use is unavoidable, especially in the use of crushers. Due to the particularity of its production work, wear is very obvious. In the case of faster equipment wear and severe damage, it will be Seriously affecting the entire production process, the production efficiency of the production line is greatly reduced. Crusher equipment wear is mainly divided into the following two aspects.
First, natural wear and tear
Usually refers to the machine in the normal use and operation process, the machine parts and components caused by mutual friction, changes in the geometry and size of the parts of the device structure. This part of the wear is usually slow, the hazard will not be caused in the short term.
However, due to the wear of the components, the mechanical contact gap between the components will increase. After a long time of wear and tear, the components that should be combined to work together will increase the clearance due to wear, and cannot be well combined. This will seriously affect the production efficiency of the crusher equipment, and at the same time, if it is not possible to replace the worn device in time, it may even cause damage to other components, resulting in greater destructive damage to the crusher equipment.
Second, premature wear
It is mainly due to the irrational structure of the machine itself, the poor quality of the materials used by individual parts, the quality of certain parts that do not meet the standards, and the damage caused by improper installation and incorrect equipment operation.
After multiple analysis, it is concluded that the crusher is a relatively large loss caused by the wear of heavy industrial equipment in the process of use. Therefore, in the use of the crusher, we need timely and good maintenance and defects of various types of wear parts. Device replacement. Only when we find problems in the process of use and deal with them in a timely manner can we better ensure the higher efficiency and normal safe operation of crushers.
