The maintenance of mine machinery is an extremely important and regular job. It should be closely coordinated with the operation and maintenance of the machine. There should be full-time staff on duty.
(1) Bearings. The shaft of the mining machine bears the full load of the negative machine. Therefore, good lubrication has a great bearing on the bearing life. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good.
(2) The looseness of the newly installed tires must be checked frequently.
(3) Pay attention to check whether the work of various parts of the machine is normal.
(4) Pay attention to checking the degree of wear of the wearable parts and pay attention to replacing worn parts at any time.
(5) The plane of the bottom frame of the movable device shall be freed from dust and other objects so as to prevent the movable bearings from moving on the bottom frame when the machine encounters unbreakable materials, resulting in serious accidents.
(6) If the bearing oil temperature rises, it should stop immediately and check the cause to eliminate it.
(7) If there is impact sound during operation, the transmission gear should be immediately stopped and checked and eliminated. Mine machinery shaker how to install and debug? Installation and adjustment of mining machinery shaker: There are many kinds of shaker screens, such as shaker screen, circular shaker, resonance screen, linear shaker, etc., and their structures are also different. The user must carry out reasonable installation, use and maintenance for different screening machines.
