Rebar connection sleeves have always been pursuing innovations and differences in production technology, which can be guaranteed not to be abandoned by the industry. The company's newly introduced steel reinforcement connecting sleeve, which is composed of sleeves, clamps, etc., both sides of the sleeve are symmetrically tapered, each side is placed with two conical blocks, and there is an isolation ring in the middle. .
Two T-shaped grooves are arranged in the sleeve cavity, two T-shaped screws are fixed on each block, and are inserted into the corresponding T-shaped grooves, and the end of the block block and the isolation ring are inserted into the sleeve cavity. There is a spring or an adjustment bar fixed to the card block at the front end of the card block, and a reverse tooth is arranged inside the card block in the sleeve cavity, and the two reinforcing bars can be firmly connected together by using the reinforcing steel connection sleeve. Even if the reinforcing bar is broken, its connecting mechanism will not break or fall off. This reinforcing bar connecting sleeve can be widely used in reinforced concrete buildings and other occasions where connecting steel bars are used.
