1) Surface cleaning: The cleaning method must be selected according to the nature of the rust-proof surface and the conditions at that time. Commonly used solvent cleaning methods, chemical cleaning methods and mechanical cleaning methods.
2) The surface can be dried and cleaned. It can be dried with filtered dry compressed air, or dried with a 120-170°C dryer. It can also be wiped with a clean gauze.
How to apply anti-rust oil
1) Immersion method: Some small items are immersed in rust-proof grease to make the surface adhere to a layer of rust-proof grease. The film thickness can be achieved by controlling the temperature or viscosity of the rust-proof grease.
2) The brush coating method is used for outdoor construction equipment or special-shaped products that are not suitable for soaking or spraying. When brushing, it is necessary to pay attention not to produce accumulation, and it is also necessary to prevent the paint from leaking.
3) Spraying method Some large anti-rust materials cannot be oiled by immersion method. Generally, the compressed air with a pressure of about 0.7Mpa is sprayed on the air clean place. The spray method is applicable to solvent diluted rust preventive oils or thin layer rust preventive oils, but perfect fire protection and labor protection measures must be adopted.
What are the main factors that affect metal corrosion?
Metal corrosion is caused by a variety of intrinsic and external factors, which are summarized as follows:
1 The chemical composition and structure of metal materials itself; imported bearing network columns are: bearing applications, bearing model inquiries, bearing models, bearing types, imported bearings, bearing model Daquan, bearing knowledge.
2 metal surface finish (oxygen concentration difference battery corrosion);
3 The solution composition and pH value in contact with the metal surface; Common types of bearings in China: Rotary table bearings, Full complement roller bearings, Spherical plain bearings, Mill bearings, Thrust roller bearings, Joint bearings, Linear motion bearings, Thrust balls Bearings, one-way bearings.
4 ambient temperature and humidity;
5 Various environmental media in contact with metal surfaces.
Why does hand sweat cause metal corrosion?
Human sweat is a colorless, transparent or slightly salty, weakly acidic liquid with a pH of 5-6. In addition to containing sodium, potassium, calcium, magnesium salt, it also contains a small amount of organic acids such as urea, lactic acid, citric acid. When the sweat is in contact with the metal, a sweat film forms on the metal surface, and the sweat film can cause an electrochemical effect on the metal and corrode the metal.
Sweating is unavoidable. To prevent hand sweat from causing corrosion, production personnel should wear gloves, fingertips, or use special tools to pick up parts. Do not touch the product with your hands.
