RB type (divided outer ring type)
RB series models are basic types of crossed-cylindrical roller bearings. The inner and outer rings are miniaturized in size. The outer ring is divided and the inner ring is an integral design. It is suitable for parts requiring high inner ring rotation accuracy. .
RE type (inner ring type)
The RE series model is a new type produced by the XRB type design concept, and the main size is the same as the XRB type. The structure is that the inner ring is a split type, and the outer ring is an integral design, which is suitable for a part requiring a high rotation accuracy of the outer ring.
RU type (inner and outer ring type)
The RU series models do not require the fixing flanges and support bases because the mounting holes have already been machined. In addition, since an integrated inner and outer ring structure with a seat is adopted, the installation has almost no effect on the performance, so stable rotational accuracy and torque can be obtained. Can be used for outer ring and inner ring rotation.
RBC type (outer ring type)
The RBC series model (corresponding to IKO CRBC series) has a structure in which the outer ring is divided and the inner ring is an integral design with a cage full of roller bearings. Suitable for parts that require high inner ring rotation accuracy.
CRBH type (inner and outer ring type)
The inner and outer rings of the CRBH series models are all integrated and used for the rotation of the outer ring and the inner ring.
RA type (outer ring segmentation, ultra-thin type)
The RA series model is a compact type that reduces the thickness of the RB inner and outer rings to the limit. Suitable for parts that require a lightweight, compact design, such as robots and robotic rotating parts.
SX type (outer ring type)
The SX series model structure is similar to the RB series. The outer ring is a two-part structure. It is connected by three spring snap rings. The inner ring is designed in one piece and is suitable for places with high inner ring rotation accuracy.
XRU08 type (inner and outer ring type)
The XSU08 series is similar to the RU series in that the inner and outer rings have been machined with mounting holes, so that the fixed flange and the support base are not required. Due to the use of an integrated inner and outer ring structure with a seat, the installation has little effect on the performance, so stable rotational accuracy and torque can be obtained. Can be used for outer ring and inner ring rotation.
