Luoyang Yujie has a history of designing and manufacturing hammer crushers for many years, with advanced product structure, reliable performance, stable operation and low energy consumption. This series of hammer crusher is suitable for crushing all kinds of medium hardness and brittle materials, such as limestone, coal, salt, Baiya, gypsum, alum, brick, tile, gangue and so on. The compressive strength of the material being crushed does not exceed 150 MPa. Such hammer crushers are mainly used in industries such as cement, coal preparation, power generation, building materials, and compound fertilizers. They can break down raw materials of different sizes into uniform particles to facilitate processing in the next process. The mechanical structure is reliable and the production efficiency is high. Applicability is good.
Luoyang Yujie new hammer crusher features:
(1) The working hammerhead is cast with a new process, which is wear-resistant and impact-resistant.
(2) According to customer requirements, adjust the required granularity.
(3) Hammer broke the structural seal of the machine body and solved the problem of dust pollution and body ash leakage in the crushing workshop.
(4) Hammer mill has the advantages of beautiful design, compact structure, few wearing parts and convenient maintenance, and is an upgraded product.
Hammer crusher is used to crush various hard and abrasive materials. The compressive strength of its materials does not exceed 100 MPa and the moisture content is less than 15%. Broken material is coal, salt, chalk, gypsum, brick, limestone, etc. It is also used to break up waste materials such as shredded wood, paper with strong elasticity and toughness, paper or broken asbestos cement to recover asbestos fiber, etc. It can also be used as materials for stone crushing, stone crushing, mining crushing, plastic crushing, garbage crushing, etc. Use broken equipment. In addition, the hammer crusher can not only be used for crushing production lines, sand production lines, but also can replace cone crushers in the beneficiation production line.
Hammer crusher working principle:
Hammer crusher is mainly used to crush material by impact. The crushing process is roughly like this: the material enters the crusher and is broken by the impact of a high-speed rotary hammer. The broken material obtains kinetic energy from the hammerhead and rushes from the high speed to the baffle plate and screen bar in the frame. At the same time, the materials collide with each other, and they are broken several times. Material smaller than the gap between the screen strips is discharged from the gap; individual larger materials are again broken by impact, grinding, and squeezing of the hammer at the screen strip, and the material is hammered. Extruded from the gap to obtain the desired particle size product.
