Industrial thermocouple
Industrial thermocouple In the case of
Industrial thermocouple, thermal resistance as a temperature measurement sensor, generally appear appearance, recorders and electronic regulator supporting the use of.
What are the focus of the field device approach?
1, first of all should measure the thermocouple and thermal resistance screw scale, the car is good screw teeth.
2, thermocouple or thermal resistance device orientation, should consider the maintenance and protection of convenience.
3, according to the diameter of the screwdriver, in the measurement of the pipeline on the hole.
4, screwdriver of the welding. Spiral teeth pierced into a good hole, the screw teeth and the measurement of the pipeline was welded.
5, thermocouple or thermal resistance screwed into a good screw teeth.
6, according to the wiring diagram of the thermocouple or thermal resistance of the junction box connected to the line, and with the corresponding appearance on the dial surface convergence. The outlet hole of the junction box should be placed downwards to prevent short circuit formation due to bad sealing, water vapor dust and other stacking terminals. Note that the junction box does not touch the wall of the pipe under test to ensure that the temperature inside the junction box does not exceed the scale of 0-100 ° C.
