First of all, the machine to avoid collisions to ensure the cleanliness of the machine, do not corrode the chemical partner.
Second, the mine machinery bearing shoulders the entire load of the machine, so in a very good relationship to lubricate the bearing life, it directly affects the machine's operating rate and life needs, so the lubricating oil injection is clean, so the injected lubricating oil must be cleaned The seal must be good.
Finally, the routine inspection and reinforcement of the equipment should record the inspection results, including not only past records, maintenance, and change records, but also daily records of usage and workload in order to analyze and judge mechanical failures and eliminate faults in a timely and accurate manner. . The advantages and disadvantages of the use of machinery and equipment have, to a large extent, limited the quality of the progress of the project and the cost. In the use of mechanical equipment, mechanical and environmental factors directly affect the use of two major mechanical equipment performance is good or bad process. Machinery and equipment, used to improve performance, must strengthen the mechanical and environmental management of two major factors.
Maintenance points
1, the shaft bears the full load of the negative machine, so good lubrication has a great bearing on the bearing life, it directly affects the service life and operating rate of the machine, thus requiring the injected oil must be clean, the seal must be good, the machine's Main oil filling point (1) Rotating bearing (2) Roller bearing (3) All gears (4) Moving bearing, sliding plane.
2. Looseness of newly installed tyres is often subject to frequent inspections.
3, pay attention to the work of all parts of the machine is normal.
4, pay attention to check the wear of the wear parts, always pay attention to replace the worn parts.
5, put the mobile device chassis plane should be out of dust and other things to avoid the machine encountered the material can not be broken when the mobile bearing can not move on the chassis, resulting in serious accidents.
6. If the bearing oil temperature rises, you should immediately stop and check the cause to eliminate it.
7, if the impact sound of the rotating gear during operation should immediately stop and check, and eliminate
