Several problems should be paid attention to when testing cement rotary kiln

This article focuses on several issues that should be noted when testing cement rotary kilns. In order to make detailed measurements on the amount of material in the production of cement rotary kiln, many measuring instruments, such as glass instruments, optical thermometers, infrared thermometers, and temperature display devices, are used. In the process of measuring the cement rotary kiln, it should be noted that the accuracy of the glass thermometer used in the determination of the material volume of the cement rotary kiln is higher than 3%, and the smaller scale value is lower than 2 degrees Celsius. In the measuring instrument, the error value of the semiconductor thermometer and thermocouple temperature measuring equipment should be controlled at about 2 degrees Celsius, while the accuracy of the optical pyrometer should be higher than 2%, and the accuracy of the infrared temperature measuring equipment should be maintained at 2%. Between 2 degrees Celsius. Only under such conditions can the calcination of materials in the cement rotary kiln be measured more accurately. In addition, we must pay attention to the problems in the material monitoring process of cement rotary kiln: 1. When using a thermometer combined with a thermometer, thermocouple and temperature display device, the temperature sensitive part must be placed. Within the measured medium and material, the depth is controlled to about 50 mm. 2, the application of optical high temperature timing, the distance between the radiator and the equipment is controlled within 1 meter, while the optical pyrometer objective lens can not be affected by other light sources, and the smoke particles and dust medium are prohibited from affecting the measurement accuracy. I believe that after you are familiar with the above knowledge, you will have a deep understanding of the material volume monitoring of cement rotary kiln. I hope this information will help you.