Hi everyone, Today we would like to introduce a three-row roller combination turntable bearing produced by our company.
This bearing can bear radial, axial and overturning load, completely replace YRT series bearing. This shaft system of this bearing directly contact raceway, avoiding the large cumulative error after YRT bearing shaft system, transmission parts combination. This shaft and raceway developed by us are completely integrated together. And the working disk can be directly placed on it to link the transmission parts, which solves a big installation problem for customers.
Installation method: first put a row of cages, then put the appropriate roller, then put radial cage. we choose brass cage, suitable for high speed. normal YRT series bearing radial is loaded with rollers, but can not rotate at high speed. This bearing loading and rigidity unchanged, but the speed us increased a lot.After the radial cage is installed, it is necessary to put a seat ring, then put another row of cages. Put the corresponding roller, and then put the gland, and connect it tightly with the link bolt. Customers can install it through the reserved mounting hole, saving a lot of installation cost.
