Large segment gears have been packaged and shipped to Qingdao Port
A gear is a spinning circular machine element with cut teeth, or inserted teeth (called cogs) in the case of a cogwheel or gearwheel, that mesh with another (suitable) toothed part to transmit (convert) torque and speed. The basic theory of gear action is similar to the basic principle of lever operation. A gear is sometimes referred as a cog colloquially. Geared devices may adjust a power source's speed, torque, and direction. Through their gear ratio, different-sized gears cause a difference in torque, producing a mechanical advantage, and so may be called a basic machine. Two meshing gears have different rotational speeds and torques in proportion to their diameters. The teeth on both meshing gears are identical in form.
A gear train or transmission is a set of two or more meshing gears that function in a specific order. The wheels in a crossing, belt pulley system are equivalent to the gears of a gearbox. The teeth of a gear prevent slippage, which is a benefit of gears. The phrase "gear" (e.g., "first gear") refers to a gear ratio rather than a physical gear in transmissions having several gear ratios, such as bicycles, motorcycles, and vehicles. Even when the gear ratio is continuous rather than discrete, or when the device does not contain gears, as in a continuously variable transmission, the word describes comparable technologies.
A gear can also mesh with a linear toothed element called a rack to provide translation rather than rotation.
Do you have any specific questions about the design or manufacture of Large segment gears? Contact Yogie! Our sales engineers will work with you from start to finish to ensure that your project is completed to your requirements.
Also, Yogie is a professional manufacturer for mining equipment, CNC Machine tools, and machinery parts for over 20years.
