Crossed tapered roller bearing is a kind of bearing used in industrial robots. It is generally used as joint parts bearings. These two kinds of bearings are one of the key parts of the robot, so there is a certain demand, no matter what it is There are many precautions when using which kind of bearing robot. Today, I will tell you about the selection method of bearing use!
Selection of bearing model
Because the cross-tapered roller bearing model is generally selected by the user's technical personnel according to the use conditions and load bearing of the supporting products. The business personnel mainly understand whether the actual load of the user is consistent with the selected bearing. If the bearing does not meet the requirements for use, the customer should be advised to change the model as soon as possible, but unless there is a special product in the selection of the model, there will generally be no problems.
Selection of bearing clearance
When purchasing a crossed tapered roller bearing, users generally only tell what model and grade they are, and rarely require the clearance of the bearing. It is necessary to understand the use conditions of the bearing, the speed of the bearing, the temperature, and the matching tolerance are directly related To the choice of bearing clearance.
The choice of grease
The choice of grease is generally based on the bearing speed, temperature resistance, noise requirements, and starting torque.
Selection of bearing seal type
The seals of YRT rotary table bearings are divided into contact seal and non-contact seal. The contact seal has good dust-proof performance but large starting torque and the non-connected seal has small starting torque, but the sealing performance is not as good as the contact type.
