Function purpose and structure principle of ball press machine
Functional use
The ball press can be used to suppress various powders such as coal powder, iron powder, coking coal, aluminum powder, iron filings, iron oxide scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke powder, etc. Powder, waste, and waste residue are widely used in refractory, power plants, metallurgy, chemical industry, energy, transportation, heating and other industries. The material produced by the ball press machine is energy-saving and environmentally friendly, easy to transport, and improves the utilization rate of waste , With good economic and social benefits.
Structural principle
The roller skin of the ball press is cast with 65 manganese. After special heat treatment, the hardness can reach more than 58 degrees. Roller skins are assembled and assembled and can be replaced after wear. The mineral powder ball machine has a buffer device, which can better protect the equipment from the impact of hard objects. The ore powder ball machine is designed with a ball bowl adjustable device so that the two-roller ball bowl is always within the adjustable range and will always be in position.
The main motor of the ball press machine: through the V-shaped belt, it is transmitted to the reducer: the reducer is transmitted to the driving shaft through the coupling, and then is driven by a pair of open gears to ensure that the two roller shafts are synchronized (the same speed is opposite). The piston of the oil cylinder bears (constant pressure is held by the oblique iron), and the system pressure is guaranteed by the hydraulic circuit, hydraulic control valve and accumulator. The adjustment gate adjusts to make the material evenly enter the middle of the pair of rollers. The unit forming pressure of the material compressing the material of the counter-rotating roller at constant speed changes from small to large. The forming pressure at the center line of the pair of rollers reaches the maximum value. After the thread, the molding pressure quickly becomes smaller and the material enters the ball-off state, and the ball is smoothly ball-off.
Luoyang Yujie Industry &Trade Co.Ltd located in the Luoyang City , one of the main heavy industrial bases in China. We specialize in the production of bearing , non standard machinery parts, and assembling equipment. If you have any interests, feel free to contact us and we warmly welcome customers and friends visit us
Website:https://www.yogiemachinery.com
