Introduction of precision rack quenching process

Dec 25, 2020

What are the working characteristics of precision rack quenching equipment and what is the process flow? With these questions, let's look at the following introduction. 1. Working characteristics: adopting longitudinal and transverse composite magnetic field induction heating and quenching; high heating efficiency, fast speed, only 6 seconds per piece; uniform hardness distribution of the hardened layer; low power consumption; the edge of the tooth surface is consistent with the middle part; the tooth The root hardened layer can be controlled; the amount of deformation is small. 2. Working principle: Turn on the high-frequency power supply, the electric contact and the inductor are connected into a loop, and the sample above the inductor becomes the induction heating body. In this way, the surface of the workpiece is not only heated by the longitudinal magnetic field, but also heated by the transverse magnetic field, achieving the purpose of uniform heating. Changing different sensors can heat the surface of workpieces with different shapes. Compared with traditional high-frequency heating, the surface heating current of the workpiece is more concentrated, the density is greater, and the heating speed is faster. In this way, the power density for heating the surface of the workpiece is several times that of traditional induction heating, and high-quality heat treatment can be performed on the surface of the workpiece. 3. Precision rack quenching process: Put it on the sensor, the cylinder is lowered, and the rack is compressed. The sensing electrode, the rack and the sensor are connected, and the distance between the sensor and the rack can be adjusted as required. The induced current generated by the vertical and horizontal magnetic field heats the tooth surface at the same time. The heating speed is very fast. The heating time is controlled. When the temperature is reached, the equipment stops heating and automatically sprays quenching liquid on the tooth surface to complete a quenching process.

Send Inquiry