The ring gear is the main part of the rotary kiln, which drives the entire cylinder to operate for a long time. It is one of the key components of the transmission. The installation quality of the large ring gear directly affects the smoothness of the rotary kiln drive system and the operation of the rotary kiln. The stability, the service life of the kiln liner, and the operating rate of the rotary kiln, so the clearance of the ring gear during the installation is too large or too small, which will affect the rotary kiln.
Luoyang Yujie technology team has combined many years of practical experience to analyze the clearance adjustment of the rotary kiln ring gear. The rotary kiln will generally run for a long time, and its internal gear teeth will inevitably have varying degrees of wear. When the clearance between the rotary kiln gears is adjusted to the theoretical value in the cooling state, the gear clearance of the rotary kiln is likely to be too large. At this time, one of the devices of the rotary kiln needs to be adjusted to reduce the gap.
If the clearance is not adjusted in time, the degree of wear of gears and other parts of the rotary kiln will be more serious, which will have a significant impact on the stable operation of the rotary kiln. The support device of the rotary kiln will also suffer from uneven stress and lose its original condition. Some balance, so in the normal production of rotary kiln, to follow the adjustment, always pay attention to the situation when the heat in the kiln heat, and after a period of continuous production, the force of the support device to make appropriate adjustments, To make the entire rotary kiln force equilibrium.
