Mine fittings are generally made of alloy materials, and if they are used for a long time, corrosion or the like will occur. It is also important to solve the problem of rust in mining accessories products. Specifically include the following:
1. The workplace should be cleaned and free of debris and dust.
Mine accessories
2, according to the requirements of different products spray paint, ready to complete the paint, use tools and a variety of deployment of raw materials, accessories, paint needs to be diluted, the quality meets the requirements.
3. The surface and cavity of the workpiece are free of oil, mud, sand, lead powder, burrs, and rust, and the attachments on the surface are removed and then painted.
4. The paint before painting shall be filtered with an 80-120 mesh screen to ensure that it is free from impurities and evenly diluted. The surface of the product is untreated and cannot be painted.
5. In the process of painting, the places with more oil and more eyes must be sprayed. The lacquer layer should be even and smooth, and the colors should be the same. There must be no defects such as missing spray, bubbles, face, flow marks, and falling off.
Spray paint is an antiseptic method that we often use. Some of our products, such as picks and diamond drills, will also be given sandblasting. On the one hand, it will enhance the wear resistance of the product and on the other hand it will also have anti-corrosion function.
Mining Machinery and Spare Parts Protection Measures
First, handling and protection:
1. All parts and components must be handled with care and must not be beaten, impact bearing positions, coordination, ribs and other key parts are strictly prohibited, must be special protection (such as tape, etc.), and promote the civilized handling.
2. All hoisting rings must be hung with hoisting rings. Lifting in other positions is not allowed.
3, the ex-factory equipment must be equipped with a suitable lifting ring to facilitate the lifting of the customer transport.
4, store time than the field of accessories to do a good anti-rust treatment (such as oil, paint).
Second, anti-rust:
Finished equipment must be painted before passing the paint, color separation as required: Base seat, coupling, gear ring gear, corner pulley, etc. are black, the main body of the mill, crusher, classifier, high frequency screen is orange red, The magnetic separation, magnetic agglomeration, etc. are indigo blue and the filter body is green.
Spray paint requirements are as follows:
1. According to the painting requirements of different products, prepare complete paint, use tools and various preparations of raw materials and accessories. The paint needs to be evenly diluted and the quality meets the requirements.
2. The workplace should be clean, free of debris and dust.
3, the workpiece surface and cavity without oil, mud, sand, lead powder, burrs, rust, and to remove the attachments on the surface, and then paint.
4. There are no oil stains, rust, and burrs on the surface of steel profiles and steel plate parts, and they are metallic in color.
5, according to the different requirements of the product prepared a good paint color, the same equipment to ensure that the same color.
