When the briquette ball press machine is plastic in the extruded coal block, some balls will be broken. Occasionally, there is no big problem in one or two, but if there are large quantities of unqualified products, it is necessary to analyze the cause of the failure.
What should I do if the pellets of the briquetting press are not tight? The briquetting press equipment is an important equipment for the production of briquettes. The ball is mainly relied on the briquetting press, and the same raw materials also occupy a large reason. If the pellets are not tight and faint, how should we solve them? The following is the introduction of the technology of Xiaoxu Tiancheng. So that everyone can better understand our briquette ball press equipment.
The pelletizing ball of the briquette ball press machine has a great relationship with the original material. If the particle size of the coal powder is too large or too small, it will have an impact. Therefore, in order to improve the sphericity and quality of the briquetting machine, the material must be To do a good job in processing, the crusher can be used to crush the raw materials well. The mixer can better mix the materials with the adhesive products, so that the quality after the ball is formed is more guaranteed. When the material enters the ball press, it is not loose, and the bulk density is uniform, so as to avoid the virtual ball not being compact. improve product quality.
At the same time, we can adhere to the distance between the pressure roller of the ball press equipment. The gap should not be too large. If the gap is too large, the pressure ball of our ball press will not be tight. The proper spacing can better guarantee our ball press. The quality of the pellets.
