Cross roller bearings need to add anti-rust oil to prevent rust. Next, several anti-rust methods are introduced.
Surface cleaning: The cleaning method must be selected according to the nature of the surface of the rust-prevented object and the prevailing conditions. Commonly used are solvent cleaning method, chemical treatment cleaning method, and mechanical cleaning method.
After the surface is dried and cleaned, it can be dried with filtered dry compressed air, or dried with a dryer at 120~170℃, or the cross roller bearing can be dried with clean gauze.
Method of applying anti-rust oil
Soaking method: Some crossed roller bearings are immersed in anti-rust grease to make the surface adhere to a layer of anti-rust grease. The thickness of the oil film can be achieved by controlling the temperature or viscosity of the anti-rust grease.
Brushing method: It is used for outdoor construction equipment or special-shaped products that are not suitable for immersion or spraying. When brushing, it is necessary to pay attention not to accumulate, but also to prevent leakage.
Spray method: Some large-scale YRT turntable bearings cannot be oiled by the immersion method. Generally, use filtered compressed air with a pressure of about 0.7Mpa for spraying in a clean air place. The spray method is suitable for solvent-diluted anti-rust oil or thin-layer anti-rust oil, but complete fire protection and labor protection measures must be adopted.







