In order to ensure the normal operation of the drive shaft and extend its service life, attention should be paid in use:
1. It is forbidden for cars to start with high gears.
2. Do not slam the clutch pedal.
3. Do not overload the car, speeding.
4. Always check the drive shaft operating conditions.
5. The tightening condition of the propeller shaft hanger should be checked frequently, whether the supporting rubber is damaged or not, and whether the connecting parts of the driving shaft are loose and whether the driving shaft is deformed.
6. In order to ensure the dynamic balance of the drive shaft, attention should always be paid to whether or not the welding lug is to be welded off. The new driveshaft assembly is provided as an accessory. When installing the new driveshaft, attention should be paid to the assembly mark of the telescopic cover. The flange fork should be kept in a plane. When disassembling the drive shaft during maintenance, the assembly marks shall be printed on the expansion sleeve and the flange shaft in order to keep the original assembly relationship unchanged during reassembly.
7. You should always add grease to the universal joint cross bearing. In the summer, you should inject the No. 3 lithium grease, and in the winter, inject the No. 2 lithium grease.
