Fast Or High-Speed Machine Concept
In actual use, more and more customers will be required to purchase the so-called "high-speed machine" or "fast machine." In general, the purpose of the product is not only the demand of the product itself, but also the other is to shorten the molding cycle and increase the output per unit time, so as to lower the production cost and enhance the competitiveness. In general, there are several ways to accomplish this:
Injection speed to speed up: increase the motor and pump motor, or increase the pressure accumulator (preferably closed loop control);
Feed rate to accelerate: the motor motor and pump increase, or feed the hydraulic motor to smaller, so that screw speed;
Multi-loop system: the use of double loop or three loop design to synchronize the composite action, shortening the molding time;
Increase the mold waterway to enhance the cooling efficiency of the mold;
However, there is no free lunch in the world. The improvement and improvement of machine performance can certainly increase the production efficiency but often increase the investment cost and operating cost. Therefore, the pre-investment benefit assessment needs to be carefully weighed so that the most appropriate machine Type has the highest benefit.
