How to adjust the axial and radial misalignment of the ball press machine
Adjustment of radial dislocation of roller ball socket
In general, if there is a radial dislocation of the ball socket, the ball groove can be adjusted by radial alignment device,Mainly use coupling long waist hole,the ball socket position is fine-tuned by adjusting the screw. The coupling of our ball press machine adopts long shaft drum type gear coupling，large adjustable angle，It also keeps the equipment running smoothly。
Adjustment of axial dislocation of roller ball socket
The axial displacement of the roller socket can be achieved by turning the adjusting screw on the lower beam，Make minor rotation of eccentric axis，the adjustment block on it drives the bearing housing to shift, so as to force the roller sleeve to move in the axial direction, so as to achieve the goal of ball groove alignment。At the same time, as long as the displacement of the adjusting block is within the range, the ball socket can be adjusted infinitely。
We always set the ball socket position before the equipment delivery，at the same time, locking nut to ensures that it will not loosen. If the axial dislocation of roller socket in the use process or when replacing the roller sleeve, you can first loosen the lock nut and adjust the adjustment screw.
