Basic knowledge of planetary gear system

Sep 26, 2021

Basic knowledge of planetary gear system


At first glance, planetary gear systems, also called planetary gear systems, seem quite complicated. This is for sure, it requires a skilled gear engineer to master all the complex aspects to design this type of gear system. If you are a senior gear engineer, this position is not for you. However, if you want a more basic understanding of planetary gears, then you have come to the right place.

 

Basic knowledge of planetary gear system

  • What is a planetary gear?


The planetary gear set consists of three types of gears; a sun gear, a planetary gear and a ring gear. The sun gear is located in the center and the planetary gear that transmits torque is usually mounted on a movable carrier. The planetary gear revolves around the sun gear and meshes with an outer ring gear. The complexity of planetary gear systems ranges from very simple to complex compound systems, depending on the application.

 


  • Where is the planetary gear system used?


Planetary gears are usually a problem for space and weight, but require a lot of deceleration and torque. This requirement applies to a variety of industries, including tractors and construction equipment that require large amounts of torque to drive the wheels. Elsewhere you will find planetary gear sets including turbine engines, automatic transmissions, and even electric screwdrivers.

 

The planetary gear system can generate a lot of torque because the load is shared by multiple planetary gears. This arrangement also creates more contact surfaces and larger contact areas between gears than traditional parallel shaft gear systems. Because of this, the load is more evenly distributed, so the gear is more resistant to damage.

 


  • Manufacturing planetary gears


The skills required to manufacture planetary gears are the same as those required for any other type of precision gear manufacturing. Yogie is a leading precision gear manufacturer, specializing in supplying custom cut and ground gears. We have a wide portfolio of gear production capacity, which includes the ability to produce all individual gears to form a planetary gear system. For specific manufacturing capabilities, such as minimum and maximum diameters, pitch diameters, and face widths, please visit our gear production capacity page. 

 

Yogie also has extensive experience when it comes to gear engineering and design. Whether you need to design a gear system from scratch, or need the assistance of a redesign, we will work with you through the entire process to ensure the accuracy of your gear design and manufacturing. Engineering services include reverse engineering, design for manufacturability, prototyping and redesign.

 

  • More information


For more advanced information about planetary gears, we recommend the following resources:

 

  • American Gear Manufacturers Association (AGMA)


AGMA often provides educational courses to support the professional development of the gear manufacturing workforce. One of the courses offered recently is planetary gear design.

 

  • Gear Talk with Chuck

 

Gear Talk with Chuck is a blog written by Charles D. Schultz for gear technology. If you are active in the gear industry, you may already be familiar with it. Gear Talk recently published a series of blog posts about planetary gears. The content comes from Schultz's many years of working experience in the gear industry and contains a lot of technical knowledge. If you are looking for information about planetary gears with unique perspectives, be sure to check the series.

 

Do you have any specific questions about the design or manufacture of planetary gear systems? Contact Yogie! Our sales engineers will work with you from start to finish to ensure that your project is completed to your requirements.


Also, Yogie is a professional manufacturer for mining equipment, CNC Machine tools, and machinery parts for over 20years.


Send Inquiry